Acetone

CH3COCH3

NOW AVAILABLE

Acetone and Isopropyl Alcohol from MicroChemicals

We are now offering our new MicroChemicals Acetone and Isopropyl Alcohol in ULSI quality. Our solvents are available in 2.5 L containers and can be ordered as single bottles or in the packaging unit of 4 x 2.5 L. Both products are ideal for substrate cleaning for organic contaminants and particles.

> Acetone
> Isopropyl Alcohol

> Info sheet
> Specification Acetone
> Specification Isopropyl Alcohol

If you are interested in further technical information or a free sample, please don't hestitate to contact us. > sales(at)microchemicals.com

Available Purity Grades of Acetone

We supply acetone in VLSI und ULSI-quality, which are usual purity grades applied in semiconductor processing and micro-electronics. The specifications of both qualities are listed in the technical data sheet below.

Typical Fields of Application of Acetone

Acetone removes organic impurities from substrates and is well suited for greasy/oily contaminations. Its high evaporation rate, however, requires a subsequent cleaning step in e. g. isopropyl alcohol in order to avoid striations on the substrate. Acetone is not well-suited as lift-off medium due to the high fire danger when heated and the trend of particles to be lifted to resorb onto the substrate.

Technical Data Sheet:

For further information please refer to the technical data sheet:
> TF Acetone VLSI (SPEC)
> MC Acetone ULSI (SPEC)

> Solvents: Theory and Application

 

Lithography Application Notes

Our list of application notes with litho-related theoretical and technical background on all stages of micro-structuring can be downloaded from here:
> application notes

Sales Volumes, Purity Grade and Shipping

Available Sales Units:

  • Bottles VLSI á 2.5 L (1 PU = 6 x 2,5 liters or single bottles)
  • Bottles ULSI á 2.5 L (PU = 4 x 2,5 liters or single bottles)
  • Bottles á 5 L (1 PU = 4 x 5 liters or single bottles)
  • 30 L or 200 L drums on request

Available Purity Grade:

  • VLSI
  • ULSI

Our typical lead time is 1-3 working days within Germany, lead times to other countries on request. On demand, in urgent cases our etchants can be shipped within 24 hours to a destination inside Germany.

Please send us your request.

e-mail: sales(at)microchemicals.com
phone: +49 (0)731 977 343 0
fax: +49 (0)731 977 343 29

Thank you very much for your interest!

Physical Properties of Acetone:

Density
Melting point
Boiling point
Flash point
Vapour pressure @ 20°C

0.79 g/cm3
-95°C
56°C
< -18°C
244 hPa

®AZ, the AZ Logo, BARLi and Aquatar are registered trademarks of Merck Performance Materials GmbH.