NB SEMIPLATE PD 200

Pd Plating Solution

General Information

NB Semiplate PD 200 is an alkaline, non cyanide, electroplating formulation which produces shiny deposit up to 1.5 µm thickness which show good adhesion and low stress.

NB Semiplate PD 200 is a ready-to-use-product. It is not necessary to add other materials for the initial start of the application. Over time, it may become necessary, depending on the electrolyte and application, to add additives (see data sheet). The recommended plating conditions are 45° C and 10 mA/cm2.

Technical Data Sheet:

For further information please refer to the technical data sheet:
> NB Semiplate Pd 200 (TDS)

 

Lithography Application Notes

Our list of application notes with litho-related theoretical and technical background on all stages of micro-structuring can be downloaded from here:
> application notes

Individual Technical Support and Price Request

Available Sales Units:

  • 1 L and 5 L bottles

Compatible :

  • Purity Grades: VLSI/ ULSI or MEMS
  • Photoresists: (AZ-)Resist compatible

If you are interested in products for the maintenance of the electrolyte solution and preparation, then please send us your inquiry.
For any further technical discussions around the application of our plating solutions in your running or scheduled plating processes, or your price and lead time request, please contact us via:

e-mail: sales(at)microchemicals.com
phone: +49 (0)731 36080 409
fax: +49 (0)731 36080 908

Thank you for your interest!

®AZ, the AZ Logo, BARLi and Aquatar are registered trademarks of Merck Performance Materials GmbH.